Peculiarities of Influence of Parameters of the Post-Deformation Heat Treatment and Chemical Composition of Steel on the Formation of Actual Size of Grain

Bulletin of Prydniprovs’ka State Academy of Civil Engineering and Architecture
doi 10.30838/j.bpsacea.2312.040719.88.468
Full Text
Abstract

Available in full text

Date
Authors
Publisher

SHEE Prydniprovska State Academy of Civil Engineering and Architecture

Related search

The Influence of Pre-Heat Treatment and Laser Hardening on the Steel Structure Formation

Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies
2016English

Effect of Grain Size on the High Temperature Creep Deformation of Austenitic Heat Resisting Steel With a Large Amount of Precipitates

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
AlloysCondensed Matter PhysicsMetalsTheoretical ChemistryMaterials ChemistryPhysical
1983English

Effect of Hot Forging, Prior Heat Treatment and Ferrite Grain Size on Austenite Grain Size of Steels

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
AlloysCondensed Matter PhysicsMetalsTheoretical ChemistryMaterials ChemistryPhysical
1973English

The Effect of Niobium and Tantalum on Grain Size of Steel

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
AlloysCondensed Matter PhysicsMetalsTheoretical ChemistryMaterials ChemistryPhysical
1969English

The Effects of Grain Size and Deformation Rate on the Tensile Properties of a Mild Steel at Low Temperature

Tetsu-to-Hagané Overseas
1963English

The Influence of Chemical Composition and Heat Treatment on Microstructure and Mechanical/Tribological Properties of Cobalt-Based Tribaloy Alloys

English

Increase of Operational Properties of Steel by Chemical Heat Treatment in the Conditions of Periodic Changes of the Atmosphere Composition

Vestnik Volgogradskogo gosudarstvennogo universiteta. Serija 10. Innovatcionnaia deiatel’nost’
2016English

The Influence of Composition and Heat Treatment on the Phase Composition and Mechanical Properties of ML19 Magnesium Alloy

Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy
2017English

Influence of Grain Size and Strain Rate on Acoustic Emission During Deformation and Fracture of a Type 316 Stainless Steel - Preliminary Results

1984English

Amanote Research

Note-taking for researchers

Follow Amanote

© 2024 Amaplex Software S.P.R.L. All rights reserved.

Privacy PolicyRefund Policy