Effect of Heat Treatments on Pore Morphology and Microstructure of Laser Additive Manufactured Parts

Material Design & Processing Communications

doi 10.1002/mdp2.29

Full Text

Abstract

Available in

Date

Authors

Publisher

Wiley

Related search

Inspection of Additive Manufactured Parts Using Laser Ultrasonics

2016English

Application of Laser Surface Polishing on Additive Manufactured Parts of Inconel 718 Nickel-Based Superalloy

MM Science Journal
Electronic EngineeringIndustrialMechanical EngineeringAutomotive EngineeringManufacturing EngineeringElectrical
2020English

Influence of Heat Treatments on Heat Affected Zone Cracking of Gas Tungsten Arc Welded Additive Manufactured Alloy 718

Metals
Materials Science
2019English

Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4v Manufactured by Selective Laser Melting Process

Archives of Metallurgy and Materials
2017English

Effect of Heat Treatment on Mechanical Properties and Residual Stresses in Additively Manufactured Parts

2018English

Influence of Process Parameters on Tensile Strength of Additive Manufactured PLA Parts Using Taguchi Method

International Journal of Recent Technology and Engineering
EngineeringManagement of TechnologyInnovation
2019English

Towards Rapid Qualification of Powder-Bed Laser Additively Manufactured Parts

Integrating Materials and Manufacturing Innovation
Materials ScienceIndustrialManufacturing Engineering
2016English

The Effect of the Microstructure and Heat Treatments on the Ductility of 50%Cr-Ni Castings

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
AlloysCondensed Matter PhysicsMetalsTheoretical ChemistryMaterials ChemistryPhysical
1979English

Fatigue Life Estimation of Additive Manufactured Parts in the As-Built Surface Condition

Material Design & Processing Communications
2019English

Amanote Research

Note-taking for researchers

Follow Amanote

© 2026 Amaplex Software S.P.R.L. All rights reserved.

Privacy PolicyRefund Policy